ICOM IC-7200 Uživatelský manuál Strana 1

When the transceiver is connected to a PC with the USB cable, the following operations can be performed;• Remote control operation (CI-V:

10Windows 2000 (Continued)DRIVER INSTALLATIONo Select “slabbus.inf” in the “Win” folder, then click [Open]. • The folder construction: “7

11Windows 2000 (Continued)DRIVER INSTALLATION!6 Click [Browse...].Click!7 Select “slabw2k.inf” in the “Win” folder, then click [Open]. • The

12COM PORT CONFIRMATIONWindows Vistaq Start up Windows.w Right click “Computer,” then select “Properties.” • “Computer” is available in <Start>

13DRIVER UNINSTALLATIONThe displayed dialogue boxes or indications may differ slightly from the following instructions according to your system condit

14FOR YOUR REFERENCECOM Port settingTo change the COM Port number setting, connect the transceiver to the PC and then turn the transceiver power ON af

15FOR YOUR REFERENCECOM Port setting (Continued)Windows XPFor Windows 2000: Refer to the following instructions because the operations of Window

16FOR YOUR REFERENCE (Continued)About audioWhen the transceiver is connected to a PC with the USB cable (third party), the following o

17FOR YOUR REFERENCEAbout audio (Continued)The modulation input settingsTo input the audio signal from the USB jack of the transceiver, set the modula

18FOR YOUR REFERENCEAbout audio (Continued)USB level settingSet the input modulation level of the USB jack in the set mode item ‘USB Level’ or CI-V sy

19FOR YOUR REFERENCE (Continued)SpecificationsConnector type USB B typeInterface USB 2.0/1.1Power supply Self power The PC cannot recognize the transc

2PROCEDURERefer to the following steps for the USB driver installation.Before installing the USB driver, log in as the administrator and quit all appl

3Before installing the USB driverIcom HP gives the USB driver download service.Before installing the USB driver, download the follow-ing compressed fil

4Windows VistaDRIVER INSTALLATIONThe displayed dialogue boxes, indications or oper-ations may differ slightly from the following instruc-tions accordi

5o After restarting the PC, connect the transceiver to the PC with the USB cable (third party) as shown below. • Be sure to connect the USB c

6The displayed dialogue boxes, indications or oper-ations may differ slightly from the following instruc-tions according to your system conditions

7Windows XP (Continued)DRIVER INSTALLATIONi Select the “Win” folder, then click [OK]. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞

8!6 Select “Install from a list or specific location (Advanced),” then click [Next>].ClickSelect!7 Select “Search for the best driver in t

9The displayed dialogue boxes, indications or oper-ations may differ slightly from the following instruc-tions according to your system conditions